Swann Computer Monitor SW248 LM8 User Manual

8” LCD Monitor  
Instruction Manual  
SW248-LM8  
SW248-LM8-10006-170309  
 
Table of Contents  
1. Before You Begin  
1
2
3
4
2. Package Contents  
3. Monitor Layout  
4. Monitor Controls  
5. Remote Control Layout  
5
6. Monitor Connections  
6.1 Connecting the Power Adapter  
6.2 Connecting the AV Cable  
6
7. Menu Operations  
7.1 Picture Menu  
7.2 Option Menu  
7.3 Clock Menu  
7
7.4 System Menu  
8. Troubleshooting Guide  
9. Technical Specifications  
Warranty  
9
10  
11  
12  
Swann Technical Support  
-ii-  
 
1. Before You Begin  
Storage  
1. Keep this product away from extreme hot or cold places. The  
storage temperature ranges from -20  
operating temperature is from 0 to 40  
to 60  
and the  
2. Do not use this product in or near moist environments such as  
bathtubs, wash basins, kitchens, basements, swimming pools etc.  
3. Do not expose the LCD display to high humidity, dust, oil or smoke  
4. Do not throw or drop this product  
5. Do not subject this device to strong vibrations, shock  
6. Do not brush or scrub this product with abrasive objects  
Maintenance  
1. Disconnect all cables from the monitor before cleaning  
2. Wipe the enclosure, screen and keys using a dry soft cloth, or  
moisten cloth with diluted dish detergent only  
3. Do not use polishing cloth, abstergent, or other types of chemical  
detergents with alcohol or benzene  
Warning!  
1. Do not use this device while driving  
2. Do not submerge this product in liquids or expose to rain  
Special Notice  
Do not attempt to repair or disassemble, there are no user  
serviceable parts inside this device.  
Contact Swann Technical support if this monitor  
malfunctions or fails to operate correctly  
-1-  
 
2. Package Contents  
LCD Monitor  
Car Power Adapter  
Power Adapter  
Remote Control  
AAABatteries for Remote Control  
A/V Cable  
Monitor Stand  
Instruction Manual  
If any of the above accessories are damaged or missing, contact  
Swann Communications for assistance.  
-2-  
 
3. Monitor Layout  
1. LCD Screen  
2. AV1/AV2 Button  
3. AUTO Button  
4. PICT Button  
5. MENU Button  
6. POWER Button  
7. UP Button  
8. DOWN Button  
9. VOL+ / Right  
Button  
10. VOL- / Left Button  
11. IR Remote Sensor  
12. Monitor Stand  
13. Bracket  
14. AV2 in jack  
15. AV1 in jack  
16. Headphone jack  
17. DC Input  
18. Speaker  
-3-  
 
4. Monitor Controls  
AV1/AV2: Switches input from AV1 to AV2  
AUTO: Press to cycle between AV1 and AV2  
inputs at 4, 6 or 8 seconds – push again to turn  
off  
PICT: Choose from 5 image settings: Standard,  
Soft, Vivid, Light and Personal  
MENU: Press to enter or exit the menu  
POWER: Press to turn monitor on/off  
: Move selection up in Menu  
: Move selection down in Menu  
VOL+: Increase Monitor volume or move  
right in menu  
VOL-: Decrease the Monitor volume or  
move left in the menu  
-4-  
 
5. Remote Control Layout  
POWER: Turn the monitor on/off  
MUTE: Press to disable sound, press MUTE  
again or press VOL to enable sound  
: Move selection up  
: Move selection down  
/VOL-: Decrease volume / move left  
/VOL+: Increase volume / move right  
MENU: Press to enter / exit the Menu  
MODE: Change image settings from Standard,  
Soft, Vivid, Light and Personal  
CALL: Displays current AV channel  
TIMER: Push to set Sleep Timer up 120 minutes  
LANG: Sets the menu language (default English)  
CALE: Press to set Calendar – date appears in Year – Month – Day  
format. Use ▲▼ to change year and ◄► to change day  
AV: Press to switch between AV1 and AV2  
Press to flip image horizontally  
Press to flip image vertically  
-5-  
 
6. Monitor Connections  
6.1 Connecting the Power Adapter:  
Connect the Power Adapter plug  
to the input on the side of the  
monitor marked DC 12V. Plug the  
other end of the adapter to a power  
point or cigarette lighter if applicable  
6.2 Connecting the AV Cable:  
AV conversion cable  
Insert the mini-jack end of the AV  
Cable into the AV1 or AV2 port on  
the Monitor. Connect the Yellow  
RCA cable to the video source of  
the AV device. Connect the Red  
and White RCA cables to the Right  
and Left audio source if applicable  
-6-  
 
7. Menu Operation  
Press MENU to display following options:  
PICTURE  
SYSTEM  
OPTION  
PRESET  
CLOCK  
7.1 PICTURE – CONTRAST, BRIGHT, COLOR, SHARP, TINT  
Press or to select the item and press or to adjust the value  
Notice  
The TINT option will appear on NTSC Monitors only  
7.2 OPTION – LANGUAGE, CALENDAR, GAME  
LANGUAGE, CALENDAR and GAME displays on the screenas below  
description:  
7.2.1 LANGUAGE  
Press or to select Language and press or to change on  
screen languages  
7.2.2 CALENDAR  
Press or to highlight Calendar and press or to adjust  
Press or to change year and press or to change month  
7.2.3 GAME – Push to enter Game Mode  
-7-  
 
7.3 CLOCK  
TIME – Set the current time  
ON-TIME – Set time to turn monitor on  
OFF-TIME – Set time to turn monitor off  
ATTENTION – Set an alarm time / reminder to appear at a specified  
time  
Notice  
If you wish to use the Timer features TIME must be set first. Times  
appear in 24 hour clock format.  
7.4 SYSTEM  
COLOR-SYS – Choose the color format from AUTO, PAL, SECAM,  
NTSC  
BLUE BACK – Change the background to blue if no signal is detected  
HORIZONTAL – Flip the image horizontally  
VERTICAL – Flip the image vertically  
-8-  
 
8. Troubleshooting Guide  
If your monitor appears to be malfunctioning or is not responding  
correctly, consult the Troubleshooting Guide below for possible  
solutions before contacting Technical Support for repair.  
Problem  
Possible Causes  
Check power connection from power  
No picture, no sound adapter or car adapter. Ensure the provided  
power adapter is used and Monitor is not in  
Standby mode.  
Check monitor is set to correct AV Channel.  
Confirm yellow AV cable is connected from  
video output on the device to the yellow  
video input on the monitor.  
No image from  
source  
Press the VOL+ button to check levels.  
Ensure headphone jack is not plugged into  
monitor. Check RCA cables are connected  
No sound  
to Red/White Audio inputs on the monitor  
AV Cable  
Check monitor brightness and contrast  
Dark picture  
levels in Picture menu.  
operating in cold environment.  
Monitor is  
Keep away from microwaves, high voltage  
lines, wireless devices that may cause  
interference if possible.  
Lines through image  
B&W or rolling image  
Ensure the Monitor is set to the correct  
region in the System > Color-Sys menu.  
NTSC for N. America, PAL for Europe,  
Australia  
Upside down or  
laterally inverted  
picture  
Adjust the Horizontal and Vertical settings  
on the remote control or in System menu.  
-9-  
 
9. Technical Specifications  
Product Code:  
Display Type:  
SW248-LM8  
Color TFT-LCD  
Video Format:  
Video Inputs:  
NTSC, PAL, SECAM  
AV inputs x 2  
800 x 600  
Display Resolution:  
Display Size:  
8” Diagonal  
4:3  
Aspect Ratio:  
Audio Inputs:  
Speakers:  
L/R AV inputs x 2  
4cm loudspeakers x 2  
>0.3W x 2CH  
Audio Output:  
Connections:  
3.5mm headphone jack, 2 x AV inputs,  
external power supply  
DC 12V  
Operating Power:  
Monitor Dimensions:  
255mm x 185mm x 35mm  
10.0” x 7.3” x 1.4”  
Weight:  
650g, 1.4lbs  
-10-  
 
Swann Communications Limited Warranty  
Terms and Conditions  
Swann warrants this product against defects in workmanship and material for a  
period of one (1) year from its original purchase date. You must present your  
receipt as proof of date of purchase for warranty validation. Any unit which proves  
defective during the stated period will be repaired without charge for parts or labour  
or replaced at the sole discretion of Swann. The end user is responsible for all  
freight charges incurred to send the product to Swann’s repair centers. The end  
user is responsible for all shipping costs incurred when shipping from and to any  
country other than the country of origin. The warranty does not cover any incidental,  
accidental or consequential damages arising from the use of or the inability to use  
this product. Any costs associated with the fitting or removal of this product by a  
tradesman or other person or any other costs associated with its use are the  
responsibility of the end user. This warranty applies to the original purchaser of the  
product only and is not transferable to any third party.  
Unauthorized end user or third party modifications to any component or evidence of  
misuse or abuse of the device will render all warranties void.  
Warning  
No user serviceable components exist in this device. Do not attempt to  
dismantle or modify the monitor for risk of damage or electrical shock.  
Maintenance and internal repairs of this device are to be carried out  
by qualified professionals only.  
-11-  
 
Swann Technical Support  
Worldwide email support  
UNITED STATES toll free  
AUSTRALIA toll free  
1-800-627-2799  
(Su, 2pm-10pm US PT)  
(M-Th, 6am-10pm US PT)  
(F 6am-2pm US PT)  
USA Exchange & Repairs  
562-777-2551  
1300 138 324  
(M 9am-5pm AUS ET)  
(Tu-F 1am-5pm AUS ET)  
(Sa 1am-9am AUS ET)  
New Zealand toll free  
0800 479 266  
(M-F, 9am-5pm US PT)  
NEW ZEALAND toll free  
UK  
0800 479 266  
020 3027 0979  
(M-F 9am-5pm GMT)  
International  
+61 3 8412 4610  
IRELAND  
015 245 007  
(M-F 9am-5pm GMT)  
time zones and the time in Melbourne Australia compare to your  
local time.  
-12-  
 
Swann Communications  
2008©  
SR247-LM8-10006-170309  
 

Snapper Lawn Aerator 2442 User Manual
Sony DVD Recorder VRD VC20 User Manual
Sony Stereo System STR DE597 User Manual
Sony Video Game Console SCPH 90004 User Manual
Sungale Digital Photo Frame CA703C User Manual
Superior Indoor Fireplace SSDVR 3530CNE User Manual
Sylvania Flat Panel Television SRT068 User Manual
Sylvania TV DVD Combo 6719DC User Manual
Sylvania VCR SSV6002 User Manual
Tanita Scale HD 332 User Manual