Sony Stereo Receiver 3 875 815 111 User Manual

3-875-815-11(1)  
2: Connecting the speakers  
3: Connecting other components  
Super Audio CD player  
STR-DA6400ES  
Quick Setup Guide  
Super Audio CD player  
Speaker cord (not supplied)  
Speaker cord (not supplied)  
© 2008 Sony Corporation Printed in Malaysia  
Audio cord (not supplied)  
1: Installing speakers  
Video components  
TV  
Speaker cord (not supplied)  
Audio cord (not supplied)  
HDMI cable (not supplied)  
10 mm (13/32")  
DVD player, Blu-ray Disc Player  
HDMI cable (not supplied)  
Speaker cord (not supplied)  
This Quick Setup Guide describes how to connect a Super Audio CD/CD player, DVD player, Blu-ray  
Disc Player, speakers, and a subwoofer so that you can enjoy multi-channel surround sound. Refer to the  
operating instructions supplied with the receiver for details.  
2: Connecting the speakers  
3: Connecting other components  
Connect the speakers according to the number and kind of your speakers.  
This is an example of how to connect this receiver and your components. Refer to step 4 of “Getting Started” of the operating instructions  
supplied with this receiver for details on other connections and other components.  
About speaker cords  
Use speaker cords, which are appropriate for the width of the room.  
By deciding on the color or mark of the speaker cord to be connected to the plus (+) or minus (–) connector, you can always be sure of connecting the cord correctly without mistaking plus or  
minus.  
This receiver is equipped with function for converting video signals. Refer to “4b:Connecting the video components” in the operating  
instructions supplied with the receiver.  
1: Installing speakers  
The illustrations above show an example of a 7.1 channel speaker system (seven speakers and one  
subwoofer) configuration. Refer to the operating instructions supplied with the receiver and the other side  
of this guide.  
4: Connect all power cords last  
About speaker terminals  
Connect the supplied AC power cord (mains lead) to the AC IN terminal on the receiver, then connect the AC power cord (mains lead) to a wall  
outlet.  
.
The illustrations in the guide designate speakers as  
through  
Connect the terminals to the terminals of the receiver and connect the terminals to the terminals of the receiver.  
Refer to the illustration or the operating instructions supplied with the receiver for details of connecting speaker cords.  
Turn the locking knob until the speaker cord is connected securely.  
Front left speaker  
Front right speaker  
Center speaker  
Surround right speaker  
Surround back left speaker  
Surround back right speaker  
Subwoofer  
*
*
About the SPEAKERS (OFF/A/B/A+B) switch  
You can select the front speaker system. Refer to “8: Setting the speakers” in the operating instructions supplied with the receiver for details.  
Surround left speaker  
* The surround back speakers (left/right) are compliant with the zone 2 operation. Refer to the operating instructions supplied  
with the receiver.  
 

Sharp Microwave Oven R 82STM User Manual
Sharp Projection Television PG C20X User Manual
Shindaiwa Edger LE254 User Manual
SMSC Switch USB2513i User Manual
Sony Flat Panel Television 4 418 730 111 User Manual
Sony Video Gaming Accessories MSAC MMD User Manual
StarTechcom Switch dvi over cat5e 6 kvm extender User Manual
Stiga Chipper 8217 3033 01 User Manual
Summer Infant Safety Gate 07050A User Manual
Sun Microsystems Server 8190994 User Manual