Sennheiser Computer Hardware AC 2 User Guide

Active Transmitter Combiner 4:1  
AC 2  
Instructions for use  
11  
 
Safety instructions  
Caution!  
Never open the unit! If units are opened by you in breach of  
this instruction, the warranty becomes null and void.  
Attention!  
Make sure that the air vents of the unit are not covered or blo-  
cked! Keep the unit away from central heating radiators and  
electric heaters!  
Caution!  
Set up the unit on an even surface or mount it into a rack! Lay  
the cables in such a way that no-one can stumble over them!  
Danger!  
Keep liquids and small parts which conduct electricity away  
from the unit! Use a slightly damp cloth for cleaning the unit.  
Do not use any solvents or cleansing agents!  
13  
 
Operating controls  
ᕡ ·  
»
¿
²
´
³ Red LED for operation indication  
· On/off switch (POWER)  
» DC input (DC IN) for mains unit  
¿ Cable grip for power supply DC cable  
´ Four DC outputs (DC OUT) for powering up to  
four transmitters  
² Four BNC cables (RF INPUTS)  
BNC socket (RF OUTPUT)  
14  
 
Putting the unit into operation  
The below connection diagram shows the connections for a  
4-channel system.  
Setting up the unit  
The unit is suitable for use as table top or can be mounted into  
a rack.  
̈
For mounting the unit into a 19" rack, use the GA 2 rack  
adapter (optional accessory).  
̈
For table top use, fix the plastic feet to the base of the unit.  
Note:  
Some furniture surfaces have been treated with varnish,  
polish or synthetics which might cause stains when they  
come into contact with other synthetics. Despite a tho-  
rough testing of the synthetics used by us, we cannot rule  
out the possibility of staining.  
15  
 
Connecting the transmitters  
You can connect up to four SR 300 IEM G2 transmitters to the  
combiner. The combiner incorporates DC distribution for  
powering the transmitters.  
̈
Pass the cables coming from the combiner’s DC outputs  
through the cable grips at the rear of the transmitters.  
º ꢀ  
̈
Insert the hollow jack plugs into the sockets º of the  
transmitters.  
Connecting the antenna  
The combiner combines the transmission signals of up to four  
transmitters onto a single antenna.  
̈
Connect the BNC cables of the combiner to the BNC  
sockets µ of the transmitters.  
µ
̈
̈
̈
Connect the telescopic antenna of one of the transmitters  
to the BNC socket of the combiner.  
Pull the end cap to extend the telescopic antenna and align  
it upwards.  
When rack-mounting the combiner, the telescopic antenna  
can be connected to the front of the GA 2 rack adapter by  
using the AM 2 antenna mount (optional accessory).  
Use a remote antenna (optional accessory) when the combi-  
ner position is not the best antenna position for optimum  
transmission.  
16  
 
Connecting the mains unit  
The combiner is powered via the NT 3 mains unit. To switch the  
combiner on, press the on/off switch (POWER). The red LED  
lights up, indicating the the unit is ready for operation.  
» ¿  
̈
̈
Pass the cable through the cable grip ¿.  
Insert the DC connector on the power supply cable into the  
DC input ».  
Note:  
As soon as the combiner is switched on, the built-in fan  
starts producing a clearly audible operating sound and  
ensures proper cooling of the unit.  
Make sure that the air vents of the unit are not covered or  
blocked.  
If problems occur ...  
The combiner does not transmit a signal  
̈
Check the connections of the NT 3 mains unit.  
Disturbed RF transmission  
̈
Make sure that the antenna is connected correctly. Use  
low-loss RF cables which are as short as possible.  
If problems occur that are not listed above or if the problems  
cannot be solved with the proposed solutions, please contact  
your local Sennheiser agent for assistance.  
17  
 
Specifications  
Active transmitter combiner 4:1  
Frequency range  
Distribution attenuation  
RF input power  
500 to 870 MHz  
0 dB ( 1 dB)  
max. 100 mW per input  
50  
Impedance  
Power supply  
12 V DC 5 %  
Current consumption  
max. 1.5 A +1 A for powering  
the transmitters  
Accessories  
NT 3 Mains unit for AC 2 and four transmitters (e.g. SR 300 IEM G2),  
output voltage: 12 V DC, output current: 2.5 A,  
European version  
NT 3-120 Mains unit for AC 2 and four transmitters (e.g. SR 300 IEM G2),  
120 V version  
NT 3-UK Mains unit for AC 2 and four transmitters (e.g. SR 300 IEM G2),  
UK version  
GZL 1019-A1 BNC-BNC coaxial cable, length 1 m  
GZL 1019-A5 BNC-BNC coaxial cable, length 5 m  
A 1031-U Passive UHF antenna  
GA 2 19” rack adapter  
AM 2 Antenna mount for mounting antennas to the front of  
the GA 2  
A 2003-UHF UHF directional antenna  
18  
 
ENGLISH  
The guarantee period for this Sennheiser product is 24 months from the date of purchase.  
Excluded are accessory items, rechargeable or disposable batteries that are delivered with the  
product; due to their characteristics these products have a shorter service life that is principally  
dependent on the individual frequency of use.  
The guarantee period starts from the date of original purchase. For this reason, we recommend  
that the sales receipt be retained as proof of purchase. Without this proof (which is checked by  
the responsible Sennheiser service partner) you will not be reimbursed for any repairs that are  
carried out.  
Depending on our choice, guarantee service comprises, free of charge, the removal of material  
and manufacturing defects through repair or replacement of either individual parts or the entire  
device. Inappropriate usage (e.g. operating faults, mechanical damages, incorrect operating  
voltage), wear and tear, force majeure and defects which were known at the time of purchase  
are excluded from guarantee claims. The guarantee is void if the product is manipulated by non-  
authorised persons or repair stations.  
In the case of a claim under the terms of this guarantee, send the device, including acces-sories  
and sales receipt, to the responsible service partner. To minimise the risk of trans-port damage,  
we recommend that the original packaging is used. Your legal rights against the seller, resulting  
from the contract of sale, are not affected by this guarantee.  
The guarantee can be claimed in all countries outside the U.S. provided that no national law  
limits our terms of guarantee.  
19  
 
EG-Konformitäts-Erklärung  
EC Certificate of Conformity / Déclaration de conformité pour la CEE  
Certificato di conformitá comunitario  
Declaración de Conformidad / EG-Conformiteitsverklaring  
SENNHEISER electronic GmbH & Co. KG  
Am Labor 1, D-30900 Wedemark  
erklären, dass das Produkt / declare that this device / déclarons que ce appareil /  
declaramos que este aparato / dichiaria che questo appareccho / verklaren, dat det toestel  
AC 2 Active Antenna Combiner 4:1  
den einschlägigen Anforderungen der EG-Richtlinie 89/336/EEC bzw. der R&TTE-  
Direktive 1999/5/EC entsprechen. Zur sachgemäßen Umsetzung der in den EG-Richtli-  
nien genannten Anforderungen wurden folgende Normen herangezogen:  
conform to the basic requirements of EEC Directive 89/336/EEC resp. R&TTE Directive  
1999/5/EC. To effect correct application of the requirements stated in the EEC Directi-  
ves, the following standards were consulted:  
sont conformes aux prescriptions fondamentales dans la Directive de la CEE 89/336/  
EEC or la Directive R&TTE 1999/5/EC. Pour mettre en pratique dans la règle de l’art les  
prescriptions des Directives de la CEE, il a été tenu compte des normes suivantes:  
complen los requimientos básicos de la normativa de la CEE 89/336/EEC resp. de la  
normativa R&TTE 1999/5/EC. Con il fin de realizar de forma adecuada los requirimien-  
tos referidos en las normativas de la CEE fueron consaltadas las siguientes normativas:  
sono conformi alla normativa 89/336/EEC resp. alla normativa R&TTE 1999/5/EC. Per  
un’appropriato risconto nell’ambito della normativa CEE sono state consultate le segu-  
enti normative:  
evereenkomt met de basiseisen van de EG-Richtlijn 89/336/EEC resp. de EG-Richtlijn  
1999/5/EC. Om de eisen, die in de EG-Richtlijnen vermeld zijn, in juiste vorm om te zet-  
ten, zijn van volgende normen gebruik gemaakt:  
ETS 300 445 ETS 300 422  
Wedemark, Oct, 2003  
Klaus Willemsen,  
Key Projects, Product Marketing  
53  
 
Bemerkung:  
Vor Inbetriebnahme sind die jeweiligen länderspezifischen Vorschriften zu beachten!  
Important:  
Before putting the device into operation, please observe the respective country-spe-  
cific regulations!  
Important:  
Avant d’utiliser l’appareil, veuillez observer les dispositions légales en vigueur dans  
votre pays.  
Nota:  
Prima della messa in funzione seguite le prescrizioni vigenti nel paese nel quale viene  
utilizzato!  
Observación:  
!Anterior a la puesta en funcionamiento deberán observarse las correspondientes  
ordenanzas nacionales!  
Opmerking:  
Voor inbedrijfstelling dient u de afzonderlijke landspecifieke voorschriften in acht te  
nemen!  
Diese Service-Nummer gilt nur für Deutschland  
54  
 
Sennheiser electronic GmbH & Co. KG  
30900 Wedemark, Germany  
Phone: +49 (5130) 600 0  
Fax: +49 (5130) 600 300  
Printed in Germany  
Publ. 12/03  
90684/A01  
 

PYLE Audio Speaker System PCMX265W User Guide
Renesas Computer Hardware R0E571250CFG00 User Guide
RIDGID Impact Driver E 910 User Guide
Rolls Music Mixer RM65 6 x 4 User Guide
Ryobi Blower RY42110 User Guide
Samsung Cell Phone 9630 User Guide
Samsung Projection Television HL R4266W User Guide
Samsung Vacuum Cleaner SU33 Series User Guide
Sanyo CRT Television DS25500 User Guide
Sears Treadmill NTL990112 User Guide