Samsung Webcam SmartCam WiFi Home Security Camera User Guide

Click <Wireless Network>.  
Enter your camera Serial Number and click  
3.  
4.  
5.  
3.  
4.  
CONNECTING THE CAMERA TO YOUR ROUTER  
<Check>.  
Connect the power adapter to the camera.  
1.  
2.  
3.  
SNH-1011N English  
Quick Start  
Guide  
Select <Wireless On> then select your wifi  
Create a private key (Password) for the  
XXXXXXXXXXXXXXX  
network. If your network is hidden, select  
Connect the network cable to the camera  
and your network router.  
camera. Use 1 to 8 alphanumeric characters.  
<Other Wifi Networks>.  
Enter the password for your wifi network  
The camera bootup will take about 1  
XXXXXXXXXXXXXXX  
Create a name for the camera. I.e., Home  
and click <Apply> then in the popup, click  
5.  
minute then the camera status LED will  
change from red to green.  
<OK>.  
Thank you for purchasing the Samsung  
SmartCam Wifi Home Security Camera.  
Follow the simple steps in this guide to set  
up and start using your new SmartCam.  
And click <Add>.  
J For proper networking to a Wi-Fi router with  
using the router’s WPS function, refer to the router’s manual and the product’s  
user manual available on the web page.  
Disconnect the network cable from the  
camera and the wireless router.  
6.  
Click camera icon in the camera list.  
If you have any questions or need help  
installing your new product please contact  
our free technical support.  
6.  
7.  
8.  
XXXXXXXXXXXXXXX  
SETTING UP YOUR ACCOUNT  
J The subscription and camera registration explained below can be made on your  
smartphone too. Refer to the “iPhone” or “Android” section of <Support> on  
the product web site.  
Telephone : 1-877-349-3149  
J The camera status LED will flash blue then turn steady green after about 20 seconds.  
You can now unplug the camera and place anywhere around the home within the WiFi  
range. If it continues to flash blue, a wifi connection has not been established.  
Please contact our tech support at 1-877-349-3149  
9am - 9pm EST, Monday - Friday  
Enter the Private Key for the camera and  
Related manual can be downloaded from  
click <OK>.  
J If you forget your Private Key, you must reset the  
camera. Refer to the full manual for details.  
1.  
samsungsmartcam.com.  
UNPACKING  
View your camera.  
SETTING UP NOTIFICATIONS  
You will be asked to install the web viewer  
plug-in to view the video for the first time.  
After installation, please restart the browser  
and login again.  
Select <Sign Up> to register.  
2.  
3.  
Make sure all following items are in the packaging:  
After reading the terms of use, check  
YouTube  
“I Agree...”, and click <Next>.  
Automatically uploads 30 second clip to your private YouTube account.  
Enter requested information, and click  
Click the <Video> tab.  
1.  
<Sign Up>.  
CONNECTING TO YOUR WIFI NETWORK  
Click <Setup>.  
1.  
ADDING YOUR CAMERA  
Double Sided  
Tape  
Screws /  
Warranty Card X1 /  
GPL License X1  
Click the <Youtube> tab.  
2.  
3.  
Camera  
Adapter  
Network Cable  
Quick Guide X3  
Wall anchors  
samsungsmartcam.com.  
1.  
Click <Network Setting>.  
2.  
J Save the packaging for later use.  
Select <Enable>.  
You will need the serial number found on the side of  
the packaging.  
Enter your SmartCam account username  
2.  
and password and <Login>.  
 
SNH-1011N-Quick Start Guide-ENGLISH.indd  
1
2012-10-23 오후 5:44:43  

PYLE Audio TV Mount PSW771 User Guide
Quasar CRT Television SP2724, SP2724U User Guide
Raymarine GPS Receiver ST6001 User Guide
Rover Lawn Mower 5377 12HP User Guide
Samson Mixer MPL 1640 User Guide
Samson Musical Instrument S zone User Guide
Samsung Fax Machine SF 340 Series User Guide
Samsung Microwave Oven MB7696W User Guide
SATO Printer GT4e User Guide
Sennheiser Corded Headset HME 110 User Guide